Dymo Costar 400 User Manual download pdf (Page 112)

B-108

1. If a label roll is not already loaded, load a roll as

described in Chapter 1. Make sure to use 2 inch wide

labels for the test.

2. Be certain that the printer is off, the power cord is

connected, and the printer cable is not connected to the

printer.

3. Press the form feed button and hold it down as you turn

on the LabelWriter. The LabelWriter will print a DYMO

marquee bounded by 2 horizontal bars, as well as internal

printer settings.

4. End the self test by turning off the LabelWriter.

5. Reconnect the printer cable and turn the printer back on.

Check the Labels

If the LabelWriter fails the self-test, check to see if the labels are

loaded improperly or if the printer cable is plugged in (the printer

cable should not be connected during the self-test). Reload the

labels and retry the self-test.

•= If the on/off indicator is flashing and labels are loaded,

inspect the labels to look for jammed, damaged, or

crimped labels. Reload the labels according to the

instructions in Chapter 1.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 131 132

No comments

Dymo Costar 400 User Manual Page 112