Dymo LabelWriter 450 Duo Label Printer User Manual download pdf (Page 13)

LabelWriter 450 Twin Turbo Printer

Input current (idle) 0.026 Amps

Input current (typical) 0.975 Amps (text only)

Input current (max.) 3.3 Amps based on printing a shipping label (30256) with a

maximum-size filled rectangle, after print head temperature

increases above ambient temperature.

At nominal print head temperature: 2.9 A

In graphics mode: 1.6 A

LabelWriter 450 Duo Printer

Input current (idle) 0.052 Amps

Input current (typical) 1.1 Amps (text only)

Input current (max.) 3.3 Amps based on printing a shipping label (30256) with a

maximum-size filled rectangle, after print head temperature

increases above ambient temperature.

At nominal print head temperature: 3.0 A

Note: The input current is ramped up as the 24 V is applied to the input to limit in-rush

current (there is a 2200µF filter capacitor at the input). After power is removed, allow

seven seconds for this circuit to reset before re-applying the input voltage.

Connector (JP2)

DC jack, 5.5 mm O.D. x 2.5 mm I.D. Center Positive

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

No comments

Dymo LabelWriter 450 Duo Label Printer User Manual Page 13