Dymo LabelManager PnP User Manual download pdf (Page 11)

Cleaning the Label Maker

Your label maker is designed to give you long and trouble-free service, while

requiring very little maintenance. Clean your label maker from time to time to

keep it working properly. Clean the cutter blade each time you replace the

label cassette.

To clean the tape print head

1 Open the side cover of the label maker.

2 Remove the label cassette.

3 Use a small, soft brush or cotton swab to

wipe away paper dust and other stray

particles from the inside of the label

compartment.

4 Remove the cleaning tool from the inside

of the cover. See Figure 7.

5 Gently wipe the print head with the tool.

The print head is very delicate, so use care

when cleaning.

6 Replace the cleaning tool, insert the label

cassette, and close the side cover.

To clean the cutter blade

1 Open the side cover of the label maker.

2 Remove the label cassette.

3 Press the cutter button. See Figure 8.

The cutter blade will move into view.

4 Use a cotton swab and alcohol to clean both

sides of the cutter blade.

CAUTION The cutter blade is extremely sharp.

Use caution when cleaning.

5 After cleaning the blade, release the cutter button

to return the blade to its home position.

Figure 7

Cleaning tool

Print head

Figure 8

Press and hold

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

No comments

Dymo LabelManager PnP User Manual Page 11