Dymo 4XL User Manual download pdf (Page 9)

4. Loading Labels

Important!

In order for the labels to feed properly during printing, pay attention to the following when loading

labels on the spool and into the printer:

• The label spool guide must be pushed flush against the label roll, with no gap. See

Figure 6.

• The labels must be loaded with the left edge of the label inserted against the left edge of the

label feed slot. See Figure 8.

To load a label roll

1 Press the form-feed button to eject the labels that protected the printer

during shipment.

2 Open the top cover and remove any packing material inside the

label compartment.

3 Remove the label spool from inside the top cover and pull the spool

guide from the spindle.

4 Hold the spool spindle in your left hand and place the label roll on the spindle so that the labels

feed from underneath and the left edge of the label roll is firmly against the side of the spool.

See Figure 5.

Figure 5

Spool

guide

Spool

spindle

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Dymo 4XL User Manual Page 9