Dymo LabelPoint 200 User Manual download pdf (Page 4)

The "B" (BIG FONT) mode will produce highly visible labels

using the entire print height on all except 6mm labels. In “B”

mode, all text will be printed as capitals (without accents).

• To create a label in "B" mode use or to move the

cursor under "B" and press

(

BFONT

lights in display).

• In "B" mode, you can select between

condensed

, normal or

extended

, but all other options are not available.

JUSTIFY

JUST

Labels are normally printed with the text left-justified. On

2-line labels, press

JUST

to select left-justified, right-

justified or centred text, as shown in the display. See

also LABEL LENGTH.

VERTICAL TEXT

VERT

• Rotates the text through 90° so that the label is printed

, as confirmed by the

VERT

indicator in the display.

• Press again to cancel and return to horizontal text.

Note: Vertical text is not available on 2-line labels.

MULTI-LINE PRINTING

• Press

to start the next line of text on a 2-line label,

e.g.

This is a two

line label in the display will be

printed as:

This is a two and the display will

line label indicate 2 lines:

Labels can be created as follows:

6mm

1 line small text

9mm Up to 2 lines

small text

9mm 1 line normal text

12mm Up to 2 lines

small text

12mm 1 line normal text

The line indicator in the display will confirm the number

of lines in the label.

BOXED/UNDERLINED PRINTING

BOX/UL

• If no Box/Underline option has been selected, pressing

BOX/UL

once will display the menu below:

Underlined -

—

= DYMO

Square Box -

Pointed Box - =

Round Corners - =

ZigZag Box - =

Shaded Box - =

• Use or to move the cursor under the desired

option. Either press

to select the option (confirmed

by the or — indicator displayed), or

DEL

to exit .

• When the

or — indicator is displayed, press

BOX/UL

to cancel the Box/Underline option.

LABEL LENGTH

LTH

The length is normally calculated automatically,

according to the length of the text on the label.

The label length function displays the last used fixed label

length, eg:

45mm

• Press

DEL

to exit the length function without changing

the length, or:

• Use

or to increase (5000mm / 196.85

inches max.) or decrease the length in 1mm / 0.04 inch

steps, or

or to increase or decrease the length in

10mm / 0.4 inch steps. The minimum fixed label length

is 45mm / 1.8 inch.

• Press

to fix the length for all subsequent labels,

confirmed by the

LTH SET

indicator in the display.

• Press

LTH

to cancel the fixed length and restore the

automatic length.

• If the fixed length is too short for the text, when you

press

or +

CAPS

PREVIEW

the display will show how

much longer the label is than the fixed length, eg:

and it will not print. Either cancel the fixed length (see

above), or press

LTH

twice and use to increase

the length; the label is now long enough and can be

printed.

MULTIPLE COPIES

STYLE

COPIES

• Your LabelPoint can provide multiple copies within the

range 1-99.

• To use this facility press

then

STYLE

COPIES

to show the last

number of copies set on the display, for example

# = 03

. Use or to increase or decrease

the number of copies required, then press

confirm (

COPIES

indicator lights in the display). To

print the desired quantity press

• To cancel an existing multiple copies setting, press

STYLE

COPIES

Note: A row of vertical dots will print between each label

as a cutting guide.

INCREMENTAL NUMBERING

Labels can be printed in increments of 1 automatically.

• Key in your starting number as the right most digit on

the label. Press

then

the display will

automatically move up a digit to the next number.

•

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Dymo LabelPoint 200 User Manual Page 4

Comments to this Manuals

Related products and manuals for Printers Dymo LabelPoint 200