Dymo 4XL User Manual download pdf (Page 10)

5 Slide the spool guide onto the right side of the spool and

press the guide tightly against the side of the label roll,

leaving no gap between the roll and the spool. See Figure 6.

NOTE To ensure proper feeding of labels during printing, the

label roll must fit snugly against both sides of the label spool,

with no gaps.

6 Insert the label spool into the slot in the printer cover with the

labels extending from underneath the roll. See Figure 7.

7 Align the left edge of the label with the left edge of the label

feed slot and insert the label into the slot. See Figure 8.

The printer automatically feeds the label, stopping at the

beginning of the first label.

If the printer does not feed the labels, make sure the first label

is fully inserted and then press the form-feed button.

If the first label on the roll is not a full label, press the form-feed

button to eject the partial label.

8 Carefully lower the top cover.

Figure 6

Figure 7

Figure 8

Align labels

against left edge

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Dymo 4XL User Manual Page 10