Dymo Rhino 6000 User Manual download pdf (Page 16)

If the data from one label type will not fit in the new

label type, the text that will not fit is shaded in the

display.

To change the label type

1. Press the hot key for the new label type.

2. Make any necessary adjustments to the settings for

the label type.

Changing the Label Settings

Once you create a specific label, you can change the

settings without starting all over again.

To change the label settings

1. Press SETTINGS.

2. Select Current label config. and press OK.

The settings for the particular label type are

displayed.

3. Make the necessary changes.

4. Press OK and then select Done (ESC).

Printing Vertical Lines between Cells

For multiple cell labels, such as Patch Panel, Terminal

Block, and Module, you can choose to print a vertical

line between each of the cells.

To print vertical lines between cells

1. Press SETTINGS.

2. Select Vert. lines and press OK.

3. Select On.

4. Press OK and then select Done (ESC).

A vertical mark is printed between each cell.

Using Barcodes

The printer can generate the following types of

barcodes.

You can only print a barcode on 19 mm and 24 mm

wide label tape. You can choose to print the human-

readable text or not, and you can serialize barcodes.

The barcode prints horizontally along the label with

the text in small print underneath the barcode. You

can optionally add text before and after the barcode.

Adding a Barcode

The barcode text appears on the label in the display

just like any other text. However, if the cursor is

positioned within the barcode text, Barcode and the

type of barcode are displayed in the Caption bar.

To add a barcode

1. Press BARCODE.

2. Use the arrow keys to select the barcode type, and

press OK.

3. Enter the text for the barcode within the barcode

and press OK.

Editing a Barcode

You edit an existing barcode or delete a barcode in the

same manner.

To edit a barcode

1. Move the cursor anywhere within the barcode text.

2. Press BARCODE or type a character. A message

appears asking if you would like to edit the barcode.

3. Press OK. The text of the existing barcode appears.

4. Edit the barcode text and press OK.

Deleting a Barcode

A barcode is entered on the label as one character.

To delete a barcode

1. Place the cursor at the end of the barcode on the

display.

2. Press .

Code 39 EAN 8

Code 128 Auto EAN13

UPC A UPC E

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments

Dymo Rhino 6000 User Manual Page 16

Comments to this Manuals

Related products and manuals for Printers Dymo Rhino 6000