Dymo Rhino 6000 User Manual download pdf (Page 9)

Selecting Units of Measure

You can choose to work in inches or millimeters.

To select the units of measure

1. Press SETTINGS and select Units.

2. Select Inch or mm.

3. Press OK and then select Done (ESC).

Getting to Know Your Printer

Become familiar with the location of the feature and

function keys on your printer. See Figure 1 on the

inside front cover. The following sections describe each

feature in detail.

Power

The button turns the power on and off. If no keys

are pressed after five minutes, the power is turned off

automatically.

When the printer is turned off, the current label file

and its settings are remembered for the next time the

printer is turned on. If the battery pack and power

adapter are disconnected at the same time, some of

the settings are remembered; however, the current

label file is lost and you will need to reset the tape

width when you reconnect the power and turn on the

printer.

LCD Display

The printer’s LCD display includes a caption bar across

the top, showing the current label type, and feature

indicators on the right side, showing which features

are currently selected. See Figure 5.

Figure 5

When the text you have entered will not fit on the

label as currently defined, the portion of the text that

will not fit is shaded. If you attempt to print the label

containing text that will not fit, the excess text will not

be printed.

Using the Backlight

In low light conditions, you can turn on the backlight

to make it easier to see the display. To save power, the

back light will turn off automatically after 15 seconds

of inactivity. Pressing any key will turn the backlight

back on again. The backlight key acts as a toggle to

turn the light on and off.

To toggle backlighting on and off

♦ Press .

Adjusting the Display Contrast

In addition to backlighting, you can adjust the display

contrast to help in different lighting conditions.

To adjust the display contrast

1. Press SETTINGS.

2. Select LCD contrast and press OK.

3. Use the arrow keys to select a value between

0 (lighter) and 8 (darker). The contrast changes as

you select the different settings.

4. Press OK, and then select Done (ESC).

Feature

indicators

Caption bar

Battery level

indicator

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments

Dymo Rhino 6000 User Manual Page 9

Comments to this Manuals

Related products and manuals for Printers Dymo Rhino 6000