Dymo Rhino 6500 User's Guide download pdf (Page 14)

Creating Flag Labels

Flag labels wrap around a wire or

cable leaving the text part of the

label extending out from the

cable. The text on flag labels is

automatically printed on both

ends of the label leaving a blank

space in the middle that wraps around the cable.

When the label is applied to the cable, both ends of

the label are applied back to back leaving a tail or flag.

The result is a label that can be read from both sides.

To print a flag label

1. Press FLAG.

2. Enter the length for the flag portion of the label.

Select AUTO to have the length automatically set to

fit the text. The total length of the label is calculated

by doubling the flag length and adding 34 mm to

wrap around the cable.

3. Select Done (ESC) to create the label.

4. Enter the text for the label and press PRINT.

To create multiple labels quickly, see Creating a

Series of Labels on page 18.

Creating Fixed Length Labels

Normally, the length of the label is determined by the

length of the text entered. However, you may wish to

make a label for a specific purpose that is a fixed

length regardless of the length of the text.

The factory default fixed length is 1.0” (25 mm). Any

change you make to the fixed length setting remains

in effect until you change it.

To set the label length

1. Press FIXED.

2. Enter the length of the label and press OK.

Any text that does not fit within the fixed length

appears shaded in the display and will be truncated

when the label is printed.

Creating Patch Panel Labels

Patch panel mode allows you to

label a row of ports on a patch

panel. You select the distance

between ports, enter the desired

text, and print. The result is a long

label with multiple, evenly spaced

text for each port.

To create a patch panel label

1. Press PPANEL.

2. Select Port distance.

3. Enter the distance between each port and press OK.

The factory default is 0.6” (15 mm).

4. Select # of ports.

5. Enter the number of ports and press OK.

6. Select Done (ESC) to create the label.

Each port is separated by a solid black line on the

display.

7. Enter the text for each port in the label. Use the left

or right arrow key to move from port to port.

To create data for the ports automatically, see

Creating a Series of Labels on page 18.

To print vertical lines between the ports, see Printing

Vertical Lines between Cells on page 16.

Creating Terminal Block Labels

Terminal block labels are very

similar to patch panel labels;

however, the text is printed

vertically for each block.

To create a terminal block

label

1. Press TBLOCK.

2. Select # of blocks and press OK.

3. Enter the number of blocks and press OK.

4. Select Block size and press OK.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments

Dymo Rhino 6500 User's Guide Page 14

Comments to this Manuals

Related products and manuals for Label printers Dymo Rhino 6500