Dymo Rhino 6500 User's Guide download pdf (Page 20)

Printing Options

You can choose to print multiple copies of the same

label, collate the copies, pause to cut between labels,

choose to auto-cut labels, advance the label tape, and

adjust the print contrast.

Printing Multiple Copies

You can print up to 99 copies of the same label at one

time.

To print multiple copies

1. Press # COPIES (SHIFT + PRINT).

2. Press the

S arrow to increase the number of copies

to print. The default is 2 copies.

3. Press the

T arrow to decrease the number of

copies (maximum is 99).

4. Press OK or PRINT to begin printing.

You may notice a brief pause in printing

between each label for more complex formats.

When printing is finished, the number of copies to

print returns to 2.

Collating Multiple Copies

When printing multiple copies of a label file containing

more than one label, all the copies of a label are

printed before the next label starts printing. You can

choose to have the label file print collated, so each

complete copy of the file prints before the second copy

starts. The following example shows three copies of a

label file containing three labels printed normally and

collated.

Normal

A101 A101 A101 A102 A102 A102 A103 A103 A103

Collated

A101 A102 A103 A101 A102 A103 A101 A102 A103

To collate multiple copies

1. Press SETTINGS.

2. Select Collate multi. copies and press OK.

3. Select On.

4. Press OK and then select Done (ESC).

Pausing between Labels

By default the printer pauses after printing each label

so you can cut the label. You can turn this feature off to

have the labels print continuously.

This setting is not active when Auto-cut

between labels is turned on.

To set the printer to print continuously

1. Press SETTINGS.

2. Select Pause to cut btw labels and press OK.

3. Select Off.

4. Press OK and then select Done (ESC).

Using the Auto-Cut Option

When the Auto-cut setting is turned on, each label is

automatically cut after printing. This setting is turned

on by default, but you can turn it off, for example, if

you want to print labels continuously or use the pause

to cut between labels setting.

To turn off the auto-cut setting

1. Press SETTINGS.

2. Select Auto Cut and press OK.

3. Select Off.

4. Press OK and then select Done (ESC).

Advancing the Label Tape

The default leader space for all labels is approximately

5/16” (10 mm). To add additional blank space to the

beginning or end of your label, you can feed the tape

in 5/16” (10 mm) increments.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Dymo Rhino 6500 User's Guide Page 20

Comments to this Manuals

Related products and manuals for Label printers Dymo Rhino 6500