Dymo Rhino 6500 User's Guide download pdf (Page 8)

Remove the batteries if the printer will not be

used for a long period of time.

Recharging the Battery Pack

The battery pack automatically recharges while the

printer is connected to a power source through the

power adapter. Charging the battery pack for the first

time will take approximately eight hours; recharging

the battery pack will take approximately two hours.

Inserting and Removing the Tape

Cassette

Your printer comes with a starter tape cassette. Visit

www.rhinolabeling.com for information about

purchasing additional tape cassettes.

To insert the tape cassette

1. Press the black latch (located on the front of the

printer) to the right to open the tape cassette door.

2. Make sure the tape and ribbon are taut across the

mouth of the cassette and that the tape passes

between the guides. If necessary, turn the ribbon

rewind spool clockwise to tighten the ribbon.

3. Insert the cassette with the tape and ribbon

positioned between the guideposts.

Figure 4

4. Press gently on the cassette until the cassette

moves into place. The insertion mechanism will

guide the cassette into place.

5. Close the tape cassette door.

To remove the tape cassette

1. Press the black latch (located on the front of the

printer) to the right to open the tape cassette door.

2. Press the cassette eject button. The tape cassette is

lifted from the printer.

3. Gently remove the tape cassette.

4. Insert a new tape cassette as described above.

5. Reset the tape width as described in Setting the

Tape Width.

Setting the Tape Width

Each time you insert a tape cassette into the printer,

you are prompted to set the tape width so the printer

knows what size label tape you are currently using.

Some of the features you use to design labels are

dependent on the width of the tape.

However, to create a label for a tape width different

than what is currently in the printer, you can set the

tape width from the Settings menu.

To set the tape width

1. Press SETTINGS. The Settings menu appears on the

display.

2. Select Tape Width.

3. Select the width of the label tape currently inserted

in the printer.

4. Press OK and then select Done (ESC).

Selecting a Language

Several language-related features on the printer are

determined by the language setting, such as special

characters, menu text, and so on. By default the

language is set to English.

Eject Button

Guide posts

Ribbon rewind

spool

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Dymo Rhino 6500 User's Guide Page 8

Comments to this Manuals

Related products and manuals for Label printers Dymo Rhino 6500