Dymo Wireless PnP User's Guide download pdf (Page 19)

LabelManager

Wireless PnP

User Guide

Caring for the Label Maker

Your label maker is designed to give you long and trouble-free service, while

requiring very little maintenance. Clean your label maker from time to time to keep

it working properly. Clean the cutter blade each time you replace the label

cassette.

To clean the cutter blade

1 Press and then pull

outward to open the side

cover of the label maker.

2 Remove the label cassette.

3 Press and hold the power

button.

4 While holding the power

button, press and release

the cutter button to move

the cutter blade.

5 Repeat step 3 until the

cutter blade is exposed.

See Figure 6.

6 Release the power button.

7 Use a cotton ball and alcohol to clean both sides of the blade.

The cutter blade is extremely sharp. Use caution when cleaning.

8 After cleaning the blade, press and release the cutter button to return the

cutter blade to the home position.

To clean the print head

1 Press and then pull outward

to open the side cover of the

label maker.

2 Remove the label cassette.

3 Use a small, soft brush or cotton

swab to wipe away dust and

other stray particles from the

inside of the label compartment.

4 Remove the cleaning tool from

inside the label compartment

cover.

5 Gently wipe the padded side of

the tool across the print head.

See Figure 7.

The print head is very delicate,

so use care when cleaning.

6 Replace the cleaning tool, insert

the label cassette, and close the

side cover.

Cutter

blade

Figure 6

Print head

Figure 7

Cleaning tool

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

Comments to this Manuals

No comments

Dymo Wireless PnP User's Guide Page 19

Comments to this Manuals

Related products and manuals for Label printers Dymo Wireless PnP